Field accessories · Bipods & rests
Bipods & Shooting Rests
The third point of contact that turns a hunting rifle into a target rifle. Pick the right rail adapter first, then pick your bipod.
The quick answer
A bipod is the third point of contact between the rifle and the ground — the first two being your shoulder and your forward hand. By adding a stable forward support, the bipod removes one of the biggest sources of shot-to-shot variation (your forward hand’s micro-movements) and lets the rifle’s mechanical precision actually show up on paper.
For PCP hunting, a bipod is the difference between shooting at 30 yards offhand and shooting at 50+ yards prone. For pest control or competition, it’s the upgrade that lets you stack a 10-shot group inside an inch instead of three inches.
The hard part is the attachment. Modern PCPs use 20mm Picatinny rails; older Diana/Artemis platforms use 11mm dovetails; some wood-stocked traditionals use sling studs; and a few (the Diana Chaser) don’t have any forend attachment at all. Pick your bipod and adapters to match your rifle, not the other way around.
When shopping
What to look for in a bipods & shooting rests.
- ✓Pick your rifle's attachment first Most PCPs ship with one of three forend attachment options: 20mm Picatinny rail (Snowpeak Lynx Gen 3, modern Avenger, JTS Airacuda), 11mm dovetail (older Diana/Artemis platforms), or a sling-stud on a traditional wood-stocked rifle. Buy the bipod that matches, or buy a rail adapter to convert.
- ✓Height range matters for your shooting position 6-9″ bipods are the bench/prone standard — knee-high or lower. 7.5-9″ works for tall benches or seated shooting. For ground shooting (prone in a field), shorter (6-7″) is better; for benchrest, 7-9″ is the sweet spot. Match to your shooting position.
- ✓Independent leg adjustment beats fixed-angle On uneven ground, a fixed-angle bipod tips the rifle off-vertical. Independent leg adjustment (V10 Tactical) lets you level the rifle on any terrain — the difference between a hunting bipod that works in the field and a bench bipod that only works on a table.
- ✓Rail adapters are cheap, swap them once If your rifle has 11mm dovetail and you want a Picatinny bipod, the partner's 11mm-to-22mm Picatinny adapter (2-pack for ~$15) snaps in once and gives you universal compatibility. Buy this with your first bipod and you'll never have to think about the rail format again.
- ✓Some PCPs need a barrel band first The Diana Chaser doesn't have a forend rail at all — the rifle is a pistol with a stock attachment. To mount a bipod, you need the Diana Chaser Barrel Band with bottom rail the partner sells. Pistol-platform PCPs (Chaser, Bandit, the smaller Artemis platforms) often need this kind of intermediary adapter.
Sourced from our partner
Bipods & Shooting Restss we feature.
Each product below has its own full reference page on Hunt & Live with spec table and editorial pick rationale. Buy direct from our partner — Canadian family business, flat $17 CAD shipping, real product support.
V10 Tactical Bipod (Independent Legs + Angle)
Independent leg adjustment, 10° cant, four leg-position locks. The field-grade bipod for uneven ground. 100% positive on 7 orders.
Tactical Bipod 7.5-9″ Picatinny
Standard 7.5-9″ tactical bipod with Picatinny attachment. Hardened steel + aluminum, 5 retractable leg lengths. The bench/seated-shooting standard at 43 orders.
6-9″ Shooting Bipod (Sling Stud + 20mm Rail)
6-9″ bipod that ships with both a sling-stud adapter AND a 20mm Picatinny adapter. The universal-mount choice for a wood-stocked or modern PCP.
Diana Chaser Barrel Band with Bottom Rail
Barrel band that adds a Picatinny rail under the Diana Chaser barrel — required to mount any bipod on the Chaser. Also fits Bandit, StormRider, PR900W v1/v2, LR700W, PP800. 162 orders.
11mm Dovetail to 22mm Picatinny Rail Adapter (2-pack)
Snap-in adapter converts 11mm dovetail to 22mm Picatinny. Universal bipod compatibility for older Diana/Artemis platforms. 34 orders.
Want more options?
3 bipods (7.5-9″, 6-9″, V10 Tactical) plus 2 rail adapters. The complete bipod-and-attachment ecosystem from the partner.
Browse all bipods & shooting restss at Airgun Archery Fun →
Pillar resource · Featured
The Perfect PCP Starter Kit for Beginners
Every part. Every line item. Picked, budgeted, and linked. Snowpeak Lynx Gen 3 rifle with bundled scope, hand pump, pellets, mounts, silicone oil, fill adapter, bipod, and case — $1,200–$1,500 CAD total, every item from our Canadian partner.
Read the full starter-kit guide →In partnership with
