Scope mount · 11mm dovetail
11mm Dovetail One-Piece Scope Mount with Adjustable Elevation & Windage
One-piece mount with built-in elevation AND windage adjustment. The long-range workaround for older dovetail PCPs that need more travel than the scope turret has.
Image credit: Airgun Archery Fun
Quick take
A one-piece scope mount for 11mm dovetail rails with adjustable elevation AND windage built into the mount itself — meaning you can compensate for the rifle's mechanical bias without burning through your scope's internal turret travel. The right pick for an older Diana/Artemis/Stormrider rifle being pushed past 50 yards where the scope's internal adjustment runs out. Fits 25.4mm and 30mm scope tubes. Currently out of stock — check partner for restock.
Canadian family business · Flat $17 CAD shipping
Specifications
Key specs
| Style | One-piece scope mount with integrated adjustment |
| Rail pattern | 11mm dovetail |
| Scope tube fit | 25.4mm (1-inch) and 30mm |
| Adjustment | Elevation AND windage built into the mount |
| Use case | Long-range shooting on dovetail-rail PCPs where scope internal turret travel is insufficient |
| Stock | Out of stock at time of writing |
The Hunt & Live take
Why this mount earns the pick
Most older dovetail-rail PCPs (Diana StormRider, Diana Chaser, Diana Bandit, Snowpeak PR900 original gen, Beeman Raider in dovetail config) have a mechanical bias built into how the barrel and rail sit relative to each other. At short range it doesn’t matter — the scope’s internal turrets compensate. At 50, 75, or 100 yards, the scope can run out of internal elevation travel before you’ve hit the target.
This mount solves that by adding elevation and windage adjustment in the mount itself, so the scope’s internal turrets stay close to their optical centre (where the glass performs best) and the mount carries the gross adjustment burden. The partner’s product description names this exactly: “no more straining the limits on your scope adjustments.”
What it pairs with
- Diana StormRider (11mm dovetail variant)
- Diana Chaser / Bandit with 11mm dovetail rail
- Snowpeak PR900 original generation (the Lynx Gen 3 is now Picatinny — see Westhunter rings for that)
- Beeman Raider 11mm dovetail configuration
- Older Artemis platforms with metric dovetail rails
This is not for the modern Picatinny-rail PCPs — for those, the Westhunter Adjustable Elevation or the Discovery 20 MOA tactical mount is the right pick.
Honest trade-offs
Currently out of stock at the partner. The 0% positive rating on 14 orders is misleading — that’s the partner’s display when no buyers have left explicit ratings (review form, not a thumbs-up). The product is solid; just no review activity.
A one-piece mount is less flexible than two-piece rings when it comes to ring spacing. If your scope has a particular ring-spacing requirement (some long tactical scopes need 3.5″+ between rings), measure first. For most 1-inch and 30mm hunting scopes, the standard one-piece spacing fits fine.
If you need the same fix for a modern Picatinny rail rifle, use the Discovery 20 MOA Tactical mount instead — same idea, different rail.
Pillar resource · Featured
The Perfect PCP Starter Kit for Beginners
Every part. Every line item. Picked, budgeted, and linked. Snowpeak Lynx Gen 3 rifle with bundled scope, hand pump, pellets, mounts, silicone oil, fill adapter, bipod, and case — $1,200–$1,500 CAD total, every item from our Canadian partner.
Read the full starter-kit guide →In partnership with
