PCP rifle · Artemis CR600W
Artemis CR600W / Stormrider .25 — Full Power Regulated
Only available at Airgunarcheryfun.ca — a CR600W converted to .25 caliber with Diana Stormrider tube, Lane regulator, and custom 3D-printed magazine. 100% positive on 41 orders.

Image credit: Airgun Archery Fun
Quick take
The only custom-converted rifle in the partner's catalog — a CR600W with the Diana Stormrider tube and valve installed, a Lane regulator with front-end gauge, a modified breech swapped from .22 to .25, and a 3D-printed 8-shot magazine. Optional second barrel band with Pic rail for bipod mounting. 100% positive on 41 orders. Currently out of stock.
Canadian family business · Flat $17 CAD shipping
Specifications
Key specs
| Brand | Artemis (Snowpeak) |
| Model | CR600W converted to .25 — Stormrider tube + Lane regulator |
| Caliber | .25 (6.35mm) |
| Muzzle velocity | 650-700 fps with 25gr pellets |
| Fill pressure | 3000 psi |
| Regulator | Lane regulator installed — gauge on front of gun |
| Tube + valve | Diana Stormrider tube and valve (upgraded from CR600W stock) |
| Intake valve | With gauge |
| Breech | Modified from .22 to .25 (writing may still say .22) |
| Barrel | .25 caliber |
| Magazine | 3D-printed 8-shot — one included + single shot tray |
| Trigger | One-stage adjustable, 0.5-4 lbs pull |
| Safety | Manual, 1-6 lbs |
| Stock | German Beech |
| Dimensions | 950 × 55 × 200mm |
| Weight | 2.10 kg |
| Magazine capacity | 10 pellets (.25 cal) |
| Optional | Second barrel band with Pic rail on bottom for bipod mounting |
| Includes | Magazine, fill probe, spare O-rings, single shot tray |
| Canadian requirement | Must be 18+ with valid PAL |
| Buyer rating | 100% positive on 41 orders |
| Stock status | Out of stock at time of writing |
The Hunt & Live take
Why this rifle earns the pick
This is the only custom-built rifle in the partner’s catalog — a CR600W that the partner has converted with:
- A Diana Stormrider tube and valve (substantially better than the stock CR600W parts)
- A Lane regulator with a front-mounted gauge for visibility
- An intake valve with its own gauge
- A modified breech swapped from .22 to .25 caliber
- A 3D-printed 8-shot magazine designed specifically for the .25 conversion
You can’t get this configuration anywhere else. The partner is doing the work that experienced PCP owners typically do over months of tinkering — and selling it as a turnkey rifle. 100% positive on 41 orders validates the build quality.
The 2.10 kg total weight makes this the lightest full-power rifle in the partner’s catalog — even with the Stormrider tube and regulator, it’s still under 5 lb.
What it pairs with
- Scope: Discovery HD 2-12×24 SFIR FFP — light scope to match the light rifle
- Mounts: Westhunter 11mm Adjustable (CR600W ships with 11mm dovetail)
- Bipod: the optional second barrel band with Pic rail is the right choice if you want to add a bipod — opt in at checkout
- Refill: 4-Stage Hand Pump — at 3000 psi the rifle is genuinely hand-pump friendly
Honest trade-offs
Out of stock at time of writing. Custom builds depend on the partner having parts available. Email Wes for ETA.
650-700 fps is on the slower side for .25 caliber. With 25gr pellets that’s still ~25-27 ft-lbs of energy, but if you want the higher .25 cal velocities of the M60B or Airacuda Max, this isn’t it.
Breech may still say “.22” — the partner is clear that the writing on the breech wasn’t re-stamped after the .25 conversion. Cosmetic only; the bore and magazine are .25.
One-stage trigger — not as refined as the two-stage triggers on most modern PCPs. The 0.5-4 lbs range is wide enough to dial in for most uses, but two-stage shooters may find the single-stage break less crisp.
3D-printed magazine. Works fine per the 41 verified orders, but plastic mags can fail eventually. Buy a spare if you’ll shoot this rifle heavily.
Canadian PAL required.

Pillar resource · Featured
The Perfect PCP Starter Kit for Beginners
Every part. Every line item. Picked, budgeted, and linked. Snowpeak Lynx Gen 3 rifle with bundled scope, hand pump, pellets, mounts, silicone oil, fill adapter, bipod, and case — $1,200–$1,500 CAD total, every item from our Canadian partner.
Read the full starter-kit guide →
