Can A Figure Eight Follow-Through Be Used With Dynamic Ropes?

Adjusting the Figure Eight for Dynamic Ropes

When using a figure eight follow-through on dynamic ropes, it’s essential to adjust the knot to account for the rope’s elasticity. A dynamic rope can stretch up to 30% of its length, which can cause the knot to come undone if not properly secured. To counteract this, create a “surge” in the knot by tightening it slightly above the loop, then releasing it. This surge helps to create a small “bump” in the rope, which allows the knot to sit more securely.

Dynamic Ropes and Knot Reliability

The reliability of the figure eight follow-through on dynamic ropes depends on the rope’s diameter and the knot’s tying technique. For dynamic ropes with a diameter of 10-11 mm, use a figure eight with 5-6 turns to create a more secure knot. For ropes with a diameter of 12-13 mm, use 6-7 turns. Additionally, use a more aggressive follow-through when tying the knot to ensure it sits properly on the rope.

Best Practices for Tying a Figure Eight on Dynamic Ropes

When tying a figure eight follow-through on dynamic ropes, use a consistent and deliberate motion to create the knot. Start by creating the loop, then pass the working end through the loop 5-7 times, depending on the rope’s diameter. Next, pass the working end through the top of the knot, then pull it gently to create the surge. Finally, adjust the knot as needed to ensure it sits securely on the rope.