Quick Answer
To tie a bowline on a bight, start by creating a loop in the rope, then pass the working end of the rope around the standing part and through the loop. Next, pass the working end around the standing part again, then through the loop from the opposite side. Finally, pull the working end to tighten the knot.
Creating the Initial Loop
When tying a bowline on a bight, begin by creating a loop in the rope. This loop should be of sufficient size to accommodate the item you want to secure. The loop should be oriented with the working end on one side and the standing part on the other. Hold the loop between your thumb and index finger, with your thumb on top of the standing part and your index finger on the bottom.
Tying the Bowline on a Bight
Pass the working end of the rope around the standing part of the rope. This will create a second loop, which will eventually become the bowline on a bight. Next, pass the working end through the initial loop from the top. This will start to form the bowline on a bight. Then, pass the working end around the standing part again, creating a second loop. Finally, pass the working end through the second loop from the bottom.
Securing the Knot
Pull the working end to tighten the knot. The bowline on a bight should now be secure. Check the knot to ensure it is not twisted and the loops are even. If necessary, adjust the knot to achieve a secure and comfortable fit. The bowline on a bight is now complete and can be used to secure a loop of rope in a variety of situations.
Find more answers
Browse the full Q&A library by topic, or jump back to the topic this question belongs to.