Quick Answer
Yes, you can install a UV water filter on your well system to remove bacteria, viruses, and other microorganisms from your water supply.
Choosing the Right UV Water Filter
When selecting a UV water filter for your well system, consider the flow rate and the type of contaminants you want to remove. A UV filter with a minimum of 40 microwatt seconds (mW-s) is recommended for general use, but if you have a well with a high turbidity or a history of bacterial contamination, you may want to consider a filter with 70 mW-s or higher. Make sure the filter is designed for the flow rate of your well, typically measured in gallons per minute (GPM).
Installation Requirements
Installing a UV water filter on your well system typically requires connecting the filter to the water line after the pressure tank and before the water distribution system. This ensures that the filtered water is distributed throughout the house. Ensure the UV filter has a built-in by-pass valve or a separate valve to allow for easy maintenance and replacement of the cartridge. When installing the UV filter, follow the manufacturer’s instructions and consider consulting a professional if you are unsure.
Maintenance and Testing
Regular maintenance is essential to ensure the effectiveness of your UV water filter. Check the UV lamp every 6-12 months to ensure it is functioning properly and replace it as needed. Also, test the water quality regularly to ensure the filter is removing the desired contaminants. Use a UV test kit to verify the UV dose is within the recommended range, and consider testing for other water quality parameters as well, such as pH, turbidity, and total dissolved solids.
Find more answers
Browse the full Q&A library by topic, or jump back to the topic this question belongs to.