Quick Answer
Before using a stored generator, perform a thorough inspection and maintenance to ensure it's in working condition, including checking the oil level, air filter, and spark plug, and lubricating the engine.
Pre-Start Inspection
Before starting a stored generator, perform a visual inspection to identify any signs of damage or wear. Check the engine for rust, corrosion, or other forms of damage. Also, inspect the electrical components, such as the spark plug and ignition coil, for signs of wear or damage. Make sure the air filter is clean and free of debris.
Lubrication and Oil Check
Check the engine oil level and top it off as needed. Use the correct type of oil for your generator, and refer to the manufacturer’s guidelines for oil capacity and viscosity. Lubricate the engine’s moving parts, such as the valve train and piston rings, to prevent wear and corrosion. This can be done using a high-quality engine lubricant, following the manufacturer’s recommendations.
Electrical System Check
Inspect the electrical system, including the spark plug wire, ignition coil, and spark plug. Clean or replace the spark plug if it’s dirty or worn out. Also, check the electrical connections for signs of wear or damage, and ensure they are secure and free of corrosion. Use a multimeter to test the voltage output of the generator to ensure it’s within the specified range.
Find more answers
Browse the full Q&A library by topic, or jump back to the topic this question belongs to.