Quick Answer
Re-torquing is necessary after a few shots as it ensures the scope or optic remains securely fastened to the rifle, preventing damage and ensuring accuracy.
Importance of Re-torquing
Re-torquing your scope or optic after a few shots is crucial to maintain its position and prevent damage to the rifle or the optic itself. This is especially important for high-power rifles, as the recoil can cause the scope to shift, leading to inaccurate shots. Re-torquing should be done after every 10-20 shots, or as recommended by the manufacturer.
Recommended Re-torquing Procedure
To re-torque your scope or optic, follow these steps: Turn the rifle on its side and remove any covers or protective gear. Use a wrench or Allen key to loosen the scope rings by 1/4 to 1/2 of a turn. Then, tighten the scope rings in a star pattern (tightening one ring while loosening the adjacent one) until snug. Re-check the scope’s position and adjust as necessary. Finally, tighten the scope rings an additional 1/4 to 1/2 of a turn to ensure secure fastening.
Optimal Re-torquing Schedule
The frequency of re-torquing depends on the type of rifle, the power of the ammunition, and the individual’s shooting style. As a general rule, re-torque every 10-20 shots for high-power rifles, and every 50-100 shots for lower-powered rifles. However, some manufacturers recommend re-torquing after every 5-10 shots, so always consult the manufacturer’s guidelines for specific instructions.
Find more answers
Browse the full Q&A library by topic, or jump back to the topic this question belongs to.