Quick Answer
Taut-Line Hitch: Can It Be Used with Elastic Cord? --- Using Elastic Cord with Taut-Line Hitch: Key Considerations When using elastic cord with the Taut-Line Hitch, it's essential to keep in mind that the shock-absorbing properties of the cord can cause the knot to become unstable over time. To mitigate this, it's recommended to use a shorter elastic cord, ideally no longer than 12 inches (30 cm), to minimize the impact on the knot's stability.
Choosing the Right Elastic Cord Gauge
Not all elastic cord gauges are suitable for use with the Taut-Line Hitch. A minimum gauge of 3-4 mm (1/8 inch) is recommended to prevent the cord from slipping through the knot. Thicker gauges can be used, but they may make the knot more prone to jamming. It’s also crucial to select a cord with a high elastic modulus to ensure consistent shock absorption.
Tying the Taut-Line Hitch with Elastic Cord
To tie the Taut-Line Hitch with elastic cord, start by creating a secure loop in the cord. Pass the working end through the loop, then take a turn around the standing part, and pass the working end through the loop again. Pull the working end gently to tighten the knot, taking care not to draw the elastic cord too tight. Adjust the knot as needed to achieve the desired level of tension.
Find more answers
Browse the full Q&A library by topic, or jump back to the topic this question belongs to.