Quick Answer
After use, remove tar from tarred bankline by applying a solvent such as kerosene or naphtha, letting it sit for 10-15 minutes, and then scrubbing with a stiff brush. Repeat the process until the tar is fully removed.
Preparing the Area and Removing Tar
Before attempting to remove tar from the bankline, make sure you are in a well-ventilated area and wear protective gloves, safety glasses, and a mask to prevent exposure to the solvent. Apply a sufficient amount of kerosene or naphtha to the tarred area, making sure to saturate it completely. Allow the solvent to sit for 10-15 minutes, which will give it time to penetrate and break down the tar.
Scrubbing and Repeating the Process
Using a stiff-bristled brush, start scrubbing the tarred area in a circular motion, working from one end to the other. Be firm but gentle to avoid damaging the bankline. If the tar is still stubborn, repeat the process of applying the solvent and scrubbing until it is fully removed. It’s essential to be patient and persistent, as tar can be difficult to remove completely.
Cleaning and Disposal
Once the tar is removed, thoroughly clean the area with soap and water to remove any remaining solvent. Dispose of the used solvent and any rags or materials contaminated with tar in a responsible manner, following local guidelines and regulations.
Find more answers
Browse the full Q&A library by topic, or jump back to the topic this question belongs to.