Quick Answer
To zero a scope on a .360 Buckhammer, start by setting the scope's elevation at 200 yards with the reticle's center point in line with the barrel's bore. Use a chronograph to verify your bullet's drop and make adjustments accordingly. Aim for a 2-3 inch drop at 300 yards.
Choosing the Right Target
When zeroing a scope on a .360 Buckhammer, it’s essential to use a high-quality target that can withstand the rifle’s high-velocity rounds. A 12x12 inch steel target at 200 yards is ideal for this purpose. Avoid using paper targets or shooting at long ranges with a new scope, as these can result in inaccurate readings and wasted ammunition.
Calibrating the Scope
To calibrate the scope, start by setting the elevation to 200 yards with the reticle’s center point in line with the barrel’s bore. Use a chronograph to measure the bullet’s velocity and drop at this range. Based on the chronograph’s readings, adjust the scope’s elevation to compensate for the bullet’s drop. For a .360 Buckhammer, a 2-3 inch drop at 300 yards is a good starting point. Adjust the windage accordingly to ensure the reticle is centered on the target. Repeat this process at 300 yards, making adjustments as necessary to achieve a 2-3 inch drop.
Verifying the Zero
Once you’ve made the necessary adjustments, verify the scope’s zero by shooting a group at 200 and 300 yards. Use a chronograph to measure the bullet’s velocity and drop at each range, and make any necessary adjustments to the scope. A good zero should result in a 2-3 inch drop at 300 yards, with the reticle centered on the target at both ranges. If the zero is off, repeat the process until you achieve the desired results.
Find more answers
Browse the full Q&A library by topic, or jump back to the topic this question belongs to.