Plow-Point Tarp Configuration For One-Sided Wind: Best Practices?

Setting Up the Plow-Point Configuration

To set up a plow-point tarp configuration for one-sided wind, start by identifying the wind direction. Secure two stakes at the top of the tarp, spaced about 6-8 feet apart, to create a diagonal line that follows the wind direction. The remaining stakes should be placed about 3-4 feet from the top, perpendicular to the diagonal line, to create a triangular shape. Make sure the tarp’s edge is parallel to the wind direction and the stakes are securely in place.

Angling and Tensioning

To ensure the tarp is properly angled and tensioned, use additional stakes to create a system of tension lines. These lines should be anchored to the ground about 6-8 feet apart, spaced evenly between the top stakes. Use cordage or rope to secure the lines to the tarp, keeping them at a 45-degree angle to the wind direction. This will help distribute the wind force evenly and prevent the tarp from flapping excessively. Regularly check and adjust the tension lines to maintain a stable and secure setup.