Quick Answer
Apply tarred bankline to emergency repairs by twisting the tarred ends together to form a knot, then wrapping the remaining length around the damaged area to secure it. For added strength, use multiple layers of bankline. Ensure a secure hold by tucking the ends under the repair.
Preparing the Bankline
To use tarred bankline for emergency repairs, first assess the damage and determine the length of bankline required. Typically, a 3 to 6 foot section of bankline is sufficient for minor repairs. Remove any dirt or debris from the damaged area to ensure a clean surface for the bankline to adhere to.
Applying the Bankline
Apply a moderate amount of pressure to twist the tarred ends of the bankline together to form a secure knot. This will prevent the bankline from coming loose over time. Wrap the remaining length of bankline around the damaged area in a clockwise direction, overlapping each layer by about 1 inch to ensure maximum strength. For added security, apply a few turns of the bankline under the repair to prevent water from entering the damaged area.
Securing the Repair
Once the bankline is in place, use a small amount of tar to seal any gaps or holes in the bankline. This will help to prevent water from seeping into the repair and causing further damage. Finally, use a piece of cordage or a line twiner to secure the tarred ends of the bankline to a nearby fixed point, such as a cleat or a stanchion, to prevent the repair from coming loose in heavy weather conditions.
Find more answers
Browse the full Q&A library by topic, or jump back to the topic this question belongs to.