Can Tarred Bankline Be Easily Spliced for Custom Lengths?

Preparing the Tarred Bankline for Splicing

To begin, identify the area of the tarred bankline that will be used for the splice, as close to the end as possible. Cut a small section of the bankline about 4-6 inches (10-15 cm) from the end, using a sharp knife or utility blade, keeping the cut as clean and straight as possible.

Splicing the Tarred Bankline

Next, use a splicing kit or a needle and thread to weave a series of parallel strands through the cut area, securing them to the remaining bankline. Apply a small amount of tar to the exposed strands and use a cordage tool or a flat tool to press the strands firmly onto the bankline, ensuring a secure bond. For added strength, use 2-3 turns of the spliced area with a 2-3 inch (5-7.5 cm) overlap before applying more tar.

Finalizing the Splice

Once the tar is applied and the strands are secure, allow the splice to dry and harden for at least 24 hours before testing its strength. The splice should be able to withstand normal handling and stress without coming undone, but it’s essential to check it regularly to ensure it remains secure over time.