Quick Answer
Clean your shotgun immediately after shooting TSS by removing the spent hulls, wiping the barrel with a solvent-based cleaning solution, and scrubbing the choke with a brush. Use a 50/50 mixture of Hoppes No 9 and gun oil to lubricate moving parts. Inspect and replace worn or damaged parts.
Disassembly and Solvent Application
Disassemble your shotgun by removing the action or top lever, depending on the type of firearm. Be sure to follow all safety precautions when handling firearms. Apply a small amount of solvent-based cleaning solution, such as Hoppes No 9, directly to the barrel and let it sit for 5-10 minutes to allow the solution to penetrate and break down any residue. Use a soft-bristled brush to gently scrub the barrel, working from the breech end outwards.
Cleaning the Choke
Use a dedicated choke brush or a small, stiff-bristled toothbrush to scrub the choke, working from the end of the barrel towards the muzzle. Be gentle to avoid damaging the choke or the barrel. If the choke is particularly stubborn, you can apply a small amount of solvent to the brush before scrubbing. Use a lint-free cloth or paper towel to wipe away any remaining residue and then apply a thin layer of gun oil to protect the metal.
Reassembly and Inspection
Reassemble your shotgun, ensuring that all parts are securely in place. Inspect the firearm for any remaining residue or debris and wipe down the action and receiver with a clean, dry cloth. Check the choke for any signs of wear or damage and replace it if necessary. Apply a small amount of gun oil to the action and receiver to keep the moving parts well-lubricated and functioning smoothly.
Find more answers
Browse the full Q&A library by topic, or jump back to the topic this question belongs to.